Making Chandeliers From Used Cardboard Materials

This time easy craft will give a tutorial on how to process waste into new items that are unique and interesting. And the garbage that we will process in this tutorial is used cardboard paper. It turns out that if we want a little effort and creative used cardboard can be processed into a beautiful and useful item. And we will make these items together because on this occasion the home design magazine will discuss how to make chandeliers from used cardboard. Therefore, let us prepare the tools and materials first. All you need to prepare are:

  1. Used cardboard
  2. Ruler
  3. Pencil
  4. Cutter
  5. Spray paint
  6. Glue shoot
  7. Cable
  8. Fittings
  9. Lights

After the tools and materials for making chandeliers from used cardboard are prepared. We move on to the next step which is how the steps are made:

  1. Prepare used cardboard, mark with pencil forming rectangular plane. With a length of 60cm and a width of 21cm then cut (for the size of the length and width of the piece you can adjust to the need).
  2. Next step color one side of the cardboard cutout with spray paint. Choose a paint color to suit your taste, then let stand until the paint is completely dry.
  3. Mark the long side of the car that is not painted into five equally long parts, then line with the cutter but remember not to cut the cardboard. This is so that the cardboard can be folded into the same pentagonal shape as seen in the picture above.
  4. Stretch the cardboard back from the pentagon folds then cut the cardboard lengthwise into seven parts with each part having a length of 60cm and a width of 3cm.
  5. Once a small piece is obtained, connect it between the ends of the piece so that it forms a pentagon with the painted side at the inside position. until the end of the seven pieces is connected to everything. Then arrange the seven as seen in the picture above. This will be used later as the frame of the chandelier.
  6. Next, we prepare to make the top of the lampshade. Cut the cardboard with the same pentagon shape as the length of the sides 12cm, according to the size of the frame pieces that we have made. So that we easily trace the size of the frame pentagon equals the sides that have been made before on cardboard then just cut using a cutter.
  7. Make a hole in the middle of the top of the lampshade that we have made before so that the end of the lamp can go into the fitting then glue the fitting with the cardboard.
  8. Just install the frame that has been made with the top, and glue it with the firing glue so that a beautiful chandelier is formed as seen in the picture below.

Making Chandeliers From Used Cardboard Materials
my picture


Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel